Field Day - 2014

Richard- VA3VDP  in the "Digital Shack"

What a weekend we had!  The weather was just about perfect, and the rain stayed away…what more could we ask for?

Many thanks go out to Don, VE3MNE, for once again hosting the team at his property on Hay Bay.  I’m not sure what we would do if we didn’t have access to the “Ranch”.

Wednesday afternoon and most of Thursday was spent cleaning up, mowing the huge lawn, and pulling out various pieces of equipment and old antennas to see what we needed to fix and repair. The big job we did first – fixing the 160m OCF Dipole that had come down over the winter.

Thursday evening we worked some good DX while testing out the dipoles.  I managed to work V63YM, Silvio in Yap, Micronesia, and VK3QD, Aubrey in Melbourne, Australia.  Not too bad with a 100w into a wire antenna.

Sunset on Hay Bay Friday evening

By Friday afternoon most of the team had arrived and had set themselves and their equipment up in various locations around the property.  Tim, VA3TIC’s set-up had to be seen to be believed….there’s not too many mobile 30 foot towers with three element beams about……but Tim has one.

Friday evening we all left for Wellington, and the Sandbank’s Grill at 1700 hours for our traditional supper out.  The beer was cold, the food was good, the stories flowed......and we all had a great time.

Saturday morning was spent doing antenna and interference checks between the five stations, and after a few tweaks and at least one total antenna change we were ready at last.  1400 hrs came and the bands erupted in near total chaos as Field Day kicked off.  It truly was, as Dave, VA3ORP, would put it, a very high electronic warfare environment.  It took me about 30 minutes to get my ears adjusted to the noise and the rhythm of the bands. 

Saturday afternoon the bands were all very short and we were not getting any distance out of them.  The 40m station was only getting out about 200 Kms, and the other stations were much the same.  By about 2000 hrs the bands started to get a bit normal and we started to see the movement out west. 

Richard, VA3VDP, our resident digital mode guru did very well this year, just about doubling last years score.  He must have been helped by the fact he had the "coolest" position of the weekend....and the view wasn't too bade either.

One of our Club members is on vacation in New Brunswick this week, we did hear him operating as a /VE9 on a couple of occasions.  We never did have a QSO with him, but that was due more to the shock of hearing him on SSB instead of CW !!!

Derek - VE3HRW getting the 10m position ready for launching

Making contacts got more and more difficult to do, even though the SFI numbers kept improving!!  By Sunday morning we were struggling to find contacts on fairly busy bands.  Unfortunately, the propagation God’s never really smiled upon us, but the good news is that the propagation God’s never smiled upon anyone else either.

I don’t have a definitive score yet, but it’s around 1019 before we tack on the extra points we are eligible for.  We have done very well over the past 5 years, consistantly placing in the top 4 clubs in the 5AC category.  So we are hoping to at least equal our standing of the past few years.

There were a number of visitors to the site over the weekend, Ted, VE3KEH and his XYL Margaret, VE3WIR.  It was good to finally put a face to Ted after talking to him many times on the our repeater.  Matt, VA3OZI, came out to the site twice!  The second time he brought out the whole family.  It was very nice to see everyone.

All in all it was an excellent radio weekend…….and only 364 days to go till the next one.

Our 2014 Field Day Map showing the result.

Field Day and the Canada Day Contest 2014

Not long to go until Field Day this year, that Holy of Holies on the amateur radio calendar. 

This year I'll be back out at the Hay Bay site our Club always uses.  This year we will be operating from only one site, not our normal two.  We have a number of operators on the sick and injured list so we have cut back.

The plan is to operate as a 5A station, four on SSB and the fifth on digital modes.

The antenna farm will consist of a 160m OCF Dipole, two 80m OCF Dipoles, two 31' verticals, a 20m portable beam, and a 10m dipole.  At least two Buddipole sets will be available as well.

This year's rules can be found HERE.

Hopefully the confusion over the new Ontario Sections will have been sorted out this year.  Last year many US stations did not know we had split Ontario into four separate Sections, Ontario North, Ontario South, Ontario East, and Greater Toronto.  Make sure your logging softwear has been updated!

So this year we get home from Field Day on Sunday afternoon, and start the Canada Day Contest Monday evening.  It'll be a quick turnaround and hopefully the XYL will keep her sense of humour!

The rules for this contest can be found HERE.

The Rideau Lakes Cycle Tour - 2014

What a great weekend to be out playing radio!!   This year was 43rd Rideau Lakes Cycle Tour.  This cycle tour runs from Ottawa to Kingston on Saturday, and back to Ottawa on the Sunday.  The weather was fantastic, in fact it was almost too good.

Each year ham radio operators from Ottawa, Perth, and Kingston band together to provide a seamless communications system for the riders and support crews.  This year, 50 operators provided support to the tour, and another two rode their bicycles and operated mobile.

Don VE3MNE checking on the riders

The Frontenac EmComm Group has looked after the southern section of the tour route for the past 9 years, and it has become quite the fixture on our activity calendar.  We look after five locations, from Perth Road Village in the North, down Hwy 10 to Queen's University in the South.  There are lots of hills in our section and on Saturday we see a lot of very tired riders.  The route from Ottawa to Kingston is 170 Kms long.

On Saturday the first rider arrived at Perth Road Village at 1030 hrs, I'd love to know what time he left Ottawa!!  During the day it was a steady stream of cyclists through my check point, all looking for water or gatorade to rehydrate, and given the high temperatures we had they drank a lot,  In fact by 1600 hrs the Perth Road Village General Store was complely out of bottled water and other drinks, and that's a first as far as we can tell.  We finally shut down the Perth Road Village check point at 1715 hrs.  It was a pretty long hot and sweaty day, and we had to be up early to get back their on Sunday morning.

Sunday was a lot cooler than Saturday thanks to some sparce cloud cover and a cooler breeze.  The first rider headed out of Queen's University at 0500 hrs, and passed through Perth Road Village at 0600 hrs, he was pushing hard to get to Ottawa so he could get to work by 1100 hrs........I can't imagine doing that!!

This year we had three emergencies that had ambulances called to them.  The first accident was in the Ottawa Sector and involved a broken pelvis.  The second accident had a broken shoulder blade, and the third accident was a face plant into the gravel at high speed.  As bad as these were, we're glad that everyone will recover.

Thanks to the guys and gals who volunteered their time this weekend to make this a success.  Plans are already being made to make next years event a bigger success.

Saturday Perth Road Village set-up

Sunday Perth Road Village set-up

RAC and the Hallucination

I’ve been pretty quiet on the subject of the RAC Empire for the past little while.  However, having read the Blog of Peter, VE3HG, the other day, I felt I too should comment on the state of ARES in this country……not that anyone from RAC will ever listen!

Peter mentions the lack of an ARES reporting structure.   Perhaps people have forgotten that we once had in Ontario an excellent on-line reporting system that was run by our ex-SEC, Bob Gammon, VA3RX.  It was an ARES resource website that had a dedicated page were the DEC’s and EC’s could fill in an on-line form, a monthly report, and submit it. Bob even paid for the website URL and hosting charges himself, not RAC.  Bob closed down that site after he had been unceremoniously fired for no reason from the Ontario SEC position.

I guess the question that needs to be asked is if individuals are so concerned with the lack of a reporting capability, why hasn’t something been done in the four years since Bob closed down the original site to rectify this issue?  Perhaps ARES needs its own national standalone website to solve this issue? 

The one thing that a reporting structure could put an end to for good are the two and three member ARES groups that do absolutely no training and conduct no exercises.  And that, as Martha says, would be a good thing.

The other question being asked is why we do not have a VP for the Field Service these days?  I guess the answer is because the previous one quit because he must have been tired of all the constant BS coming downstream at him.   I actually like Doug Mercer, the previous VPFS.  I thought he was doing a great job, that is until he started listening to some of the Ontario SM’s and their idiotic ideas, then it went downhill from there.

RAC ARES needs to adhere to the “KISS Principle”, not the complicated and unnecessary pile of drivel that is currently being spouted by the so-called “experts”.  Some of our esteemed SM’s seem to be building empires that Julius Cesar would drool over, rather than concentrating their efforts in building a solid volunteer base to expand out from.  I have said it before and I will say it again, we are amateur radio volunteer emcomm operators, not sworn members of the Royal Canadian Corps of Signals Reserve!

The question of the legitimacy in the way RAC ARES groups are formed was also brought up in Peter’s Blog article.  Why are we so worried about this?  Do we really need RAC’s permission to form an emergency communications group?  No we don’t !!!!  Just call it an “EmComm” or “Public Service” radio group and just get on with it!  If RAC isn’t giving you the service and support you need, move on, forget about them, there’s other ways of doing business that does not include RAC. If you guys think that the agencies you serve worry about whether or not their emergency communicators are RAC approved….think again, they’re just glad you’re there helping them out with their communications issues.

Peter’s Bog also mentions the future requirement for Police Record Checks for ARES members.  Personally I don’t have an issue with this.  As it stands with the non-RAC affiliated Emcomm group I belong to, our served agencies do not require us to have a PLC yet, but that could change if a new CEO or CEMC is hired in one of the four municipalities we support and asks for them to be done.  No big deal, we’ll get them done. 

The Blog goes on to mention that RAC “ARES may become so encumbered with bureaucratic, political and legal issues that it will be unable to function.”  I think they’re already there.  Have you seen the number of unelected appointees to the executive recently?   It’s becoming more and more evident that with Comrade Bawden also wearing the VPFS hat as well as his Presidential hat right now, nothing is being done at all with ARES, it’s simply being left to flounder along as it always has.

So the bottom line and the question that needs to be asked, is why are ARES members still supporting RAC, when it is so evident that RAC is not supporting you?  Ask yourself this, what tangible thing has RAC actually done for your ARES group in the past 12 months besides hold out their hand for your membership money?  I bet the answer in the vast majority of groups is “not a bloody thing”……which again leads us to the question, “Why are you still supporting them?” 

It’s obvious from what we see and read that RAC has no real vision for ARES, and without a vision there can be no plan to actually execute.  In closing I’ll leave you with a quote from Thomas Edison that sums up RAC  - "Vision without execution is hallucination.”

New Go-Boxes

HF Go-Box

Between planning for being made redundant at work, and a long cross-country trip I'm making later this year, it's been a busy time at the VE3CLQ shack. 

One project that is now finished is the two go-boxes, an HF one and a VHF one.  I would have liked them together in one box, but given what I want to use them for it's easier to keep them separate. Many thanks to Don, VE3MNE, for his great help with these projects,

The HF Box contains a FT-857D, an FTL Meter, a YT-100 tuner, and a 8 ohm speaker on the lid.

The VHF and HF antenna connections have been put through the lid of the box, and hidden in a top compartment.  When the box is closed up the only visible "radio thing" is the power pole connector that is on the side of the box.

As you can see there is lots of room left in the box for a headset, power cords, antenna coax, and the radio manual.  Total weight is about three pounds.

The VHF Box contains a Motorola CDM 1250 radio and a Coastal Chipworks TNC-X.  This box allows me to connect to RMS Express as well as use the radio for voice FM work.

VHF Go-Box

Again there is a lot of extra room in the box for extra bits and pieces as I have in the HF Box.  The good thing about these two boxes is that they cut down the amount of gear that I pack when I do an island or lighthouse activation, and it certainly reduces my set-up time considerably.

I'm still looking at adding items to them, I need to get small digital clocks to put in each of them, but the ones I want are not easy to find, so I'm still looking.

These two boxes will make their debut on June 7th and 8th during the Ottawa Cycle Clubs "Rideau Lakes Cycle Tour".  This year is the 8th year our Club has handled the communications at the Southern end of the Tour, and it's always a great time.

Both boxes have already been tested and work very well.  Looking forward to getting out more and using them on a regular basis.

Simcoe Island or ON-022

Sunday was an outstanding day to activate one of the local islands.  We had a beautiful blue sky all day and a temperature that eventually reached 18C.  The down side was the fact that the May Flies are out in force, getting into everything.....it's a good job they don't bite!!

It takes two ferry rides from Kingston to reach Simcoe Island, a large ferry that carries about 40 cars and another much smaller one that carries two or three, depending on their size.  So after the clubs weekly Sunday breakfast, Dave, VE3DZE and myself took ourselves off to the ferry dock to start the journey to Simcoe Island.

There's not much on Simcoe Island, a couple of working cattle farms and about 30 cottages or so.  The biggest thing on the island is Nine Mile Lighthouse, CAN-578, which we activate at least once a year, and especially for the ILLW each August.

Buddipole set up as a 15m Dipole

My radio for the day was the IC-703 QRP radio, with a Buddipole Antenna.  Dave's radio was an FT-450 with the 31' "Chillycon Special" with 6 radials.

We heard many European stations, nearly all of them 10 to 20 over S9, but they certainly didn't hear Dave or myself. The good propagation seemed to be reaching everyone but us!  There was some very deep QSB on the bands, and that certainly didn't help us at all.

Dave did manage to pull 6 contacts out of his FT-450, all of them in either the US or Canada.   It was very frustrating to hear the VE7's working S9 into Europe and nobody hearing us at all.  Oh well, any day playing radio......is better than a day at work.

Regardless of the fact that we didn't work any DX, it was still a great day out. 

Update......

Well seeing how its been over a month since I updated my blog I thought I should get my act together and get on with it!!

It's been an interesting month to say the least.  The big news is that I will be made redundant from my job at the end of June.  This news has "sort of" taken the wind out of my sails, but we will survive and move on with things.

I must thank Tim, VA3TIC who came over and re-strung one leg of my 80m OCF Dipole that had slipped way down in the high winds we have recently had.  Tim managed to shoot a line about another 20' higher in the tree, so we're back up on that leg at 45'.

There has not been too much amateur radio work done around here for a few weeks, to be honest I have had other things on my mind, and radio has taken a back seat. But, having given myself a kick in the ass, plans are already under way for a few activities.

In fact the first activity will be tomorrow with the activation of Simcoe Island, ON-022.  The plan is to be on the air from 1400 UTC till 1800 UTC on the usual island activation frequencies...shown below:

7.250, 14.250 - 14.260, 21.350, 28.450, 50.125, and 144.200.  The club call sign, VE3FRG will be used.

And.......in other news it was very nice to be told that with my entry of 12, 096 total points in the 2013 ARRL November Sweepstakes, I have been awarded Top in Canada in the QRP category.  Thanks to all those stations who took the time and the effort to dig my small signal out of the mud!!

See you on the bands!

RMS and Packet Radio

Over the past 14 months the Frontenac Radio Group has been busy building up an RMS Packet system for use by the Frontenac County Emcomm Team.  This system now comprises of four Nodes and two Gateways.   This will now allow us to move digital traffic all over the county.

As well as our digital system, the hams in Westport and Perth who belong to Leeds - North Grenville ARES have also built up a smaller system that ties into the Frontenac system.  They have one Node and two gateways up right now and another couple in the works.

In the past 3 months the hams from the Prince Edward County ARES have also jumped aboard and now have one Node and one Gateway built and operational.  This allows us to move Peer-to-Peer traffic from Belleville to East of Perth.

Red Dots are for the Frontenac system.  Orange for Leeds-North Grenville, and Blue for Prince Edward County.

To get started with RMS Express, a good website is HERE.   These systems are accessable via 145.070.