Field Day.......are you ready?

It's that time of year again, and Field Day is just around the corner.   Once again we're off to glorious Hay Bay in Lenox and Addington County for our 9th consecutive year.  We're quite blessed that one of our members owns 2.5 acres of water front property on the bay, and that it's ringed with 100' high trees, or as we like to call them: "Natural Vertical Antenna Support Structures", and he insists we hold Field Day there.......actually for us it's more like "Field Week".

Richard, VA3VDP, and the 2014 Digi station

As usual we will be operating VE3FRG as a 5A station - four SSB and one Digi station.  We have one station on 40m, one on 80m/160m, an all-band Digi station, a 20m station, and a 10m/15m station.  As well we will have the 2m/6m station this year.

This has worked out very well for us over the years, and our result last year in our category was the icing on the cake, and proved to us we have a winning system.

Our antenna system is comprised of a 160m OCF Dipole, a 80m OCF Dipole (both OCF's are up at 100'), a 31' vertical for use on 40m and 15m, a "Chillycon Special" for the digi station, and a 10m/15m fan dipole.   This year, for the first time, we are adding a VHF station with a 10 element 2m Yagi and a 5 element 6m Yagi.

One thing we do look forward to is our traditional visit on the Friday night to the Sandbanks Bar & Grill in Wellington.  We've always found the beer cold and the food good and the outdoor patio is a great place to relax before our ears start to ring with the cries of "CQ Field day".

I'll be on the 40m station as usual, and will be listening intently for the ever elusive VA3QV/qrp.  I'm not sure but I don't think I have ever worked Bob from Hay Bay......hopefully this will be the year as I hear he's going to be active from the new mobile shack.

The view over the bay.

This year we will also have a "part-time" CW operator dropping in.  Ron, VE3GO, will come out during Saturday and spell off the SSB operators on their bands, and pound the key for a while racking up some needed points for us.

Hopefully the propagation Gods will be smiling for Field Day weekend and we start to see an improvement from what we've been seeing over the last few weeks.  All the numbers we have seen and studied seem to point to the fact the numbers will be fine for the day.........now, if we can just get the weather man to get things sorted out everything will be perfect!

It's done!

Yes, after two years and four attempts, the activation of Upper Brewers Mill Island was finally completed this morning.  Upper Brewers in now officially designated as ON-294.

The bands were not in the greatest of shape today, both 40m and 20m were very noisy and both had quite deep QSB.  40m was very short as well.  Despite calling CQ on 10m and 15m we managed zero contacts on those bands.

There was lots of juggling frequencies this morning as there always seems to be a net in Spanish on 14.250, and they're there 24/7, as well as the ECARS Net which sits slap bang in the middle of the IOTA calling frequencies at 14.255.  By the way, the language from the ECARS Net Controller this morning left a lot to be desired, and yes, he did actually give his callsign. There seems to be far too much foul and abusive language on the air these days, and there is no need for it at all.

The majority of the contacts were done on 40m using a 31' vertical and a FT-857D.  The other station ran a IC-718 into a 20m vertical Buddipole.

This will be the last of the island activating for a while........Field Day is a coming !!

Many thanks to all those we managed to work today, we appreciate your being there!

High SWR..... ?????

Having just read Mike's Blog, VE3WDM, about his high SWR problem....it as 99.9:1,  I was glad to read Mike got the problem sorted out without any damage to his equipment.

I can only recommend to him, and others, to use the following if it happens in the future.....it may help ;-)

Available at all fine Ham Radio Stores........

Upper Brewers Mill Island Activation.......Again!!

The Locks at Upper Brewers mill

OK, we're going to try and do this again......for the fourth time!

This Saturday morning between 1300 UTC and 1700 UTC the Frontenac Radio Group is going to attempt to break the jinx, and finally activate Upper Brewers Mill Island, which is located on the Rideau Canal system.

Grid is FN14uj.

Callsign in use will be the group's call, VE3FRG.

Hopefully the bands will be singing so we can get this activation over and done with.

There will be two HF station on the air, and as usual, the frequencies will be +/-........

7.250
14.250 to 14.260
21.350
28.450

I'll be using the new IC-718 and my Chillycon 31' vertical.

The Rideau Lakes Cycle Tour - 2015 Edition

The VE3CLQ Mobile on Sunday

We had perfect weather for this years edition of the Rideau Lakes Cycle Tour, warm with just a touch of wind.

As in years past my job took me to Perth Road Village were we have two stations operating at the General Store.  One station is the Net Control for the Frontenac Section of the tour, and the other station is the liaison station with the Lanark Section Net.  This system seems to work very well for us and allows the passing of important traffic back and forth between the nets without overloading either net with unwanted information.

There are times though when Perth Road has so many portable masts and antennas in the air it looks like a NATO Divisional HQ......only the camouflage is missing!

This year was a bit different in the way the Tour was operated.  For the first time we had to provide communications to two separate routes, which of course means the operators were spread over a far greater distance.  Our "normal" route follows Perth Road and eventually becomes Division Street in Kingston.  The new route followed a convoluted route from Perth through numerous windy backroads ending up on the Battersea Road and into Kingston.  Both routes end at Queen's University where the riders send the night in the dorms.

So instead of our usual five radio support locations, this year we had eight stations on our net, and surprisingly, contrary to what we thought would happen, things went very smoothly.  Thanks to Scott, VA3PTO, from Ottawa who helped out on our net from one of the new Battersea Road locations.

VE3EOG's go-box in action

The weekend is actually a lot of good fun, and we get to see old friends who man the nine mobile units that run up and down the course providing repairs and rides to exhausted riders.

It wouldn't be the Rideau Lakes Cycle Tour without some excitement and this year we had plenty.  Several ambulances had to be called for various injuries, nothing too serious though.  And, surprisingly we had two bikes that actually failed with broken frames and broke in two!

Long days and lots of fun.  If you haven't taken part in the event yet we can always fit you in.

Riders taking a break at Battersea Village

The new rig in the shack.....

Well after Sunday's disastrous island activation attempt and the death of my much beloved FT-857D, a new radio appeared in the shack this morning.  An IC-718 now graces the bench.

While I would have dearly loved to have replaced the FT-857D with another one, I really could not justify the cost.  The IC-718 was about half the price, and although it doesn't have 6m, 2m, and 440, it will do me very nicely for the portable work I do.

It's a nice compact rig that is packed with options.  I set it up right out the box, attached the antenna, tuned up, and had a QSO with JW9JKA on Bear Island, Norway, and got him on the first call.  While I only received a 51 from him, I was quite pleased as that was done with the factory settings.

The menu system is one that you set and forget.  I had Don, VE3MNE, on the air tonight on 160m and we went through some of the settings and sorted out the mic gain.  Don says the radio sounds very good, in fact the results were very similar to my FT-950.

I think it's a bit big to actually mount in a go-box which is a bit of a draw back to me, but we will figure something out to protect it while we're operating portable.

This weekend I'm out doing the communications for the Rideau Lakes Cycle Tour, and I plan on taking the radio and my Buddypole antenna with me and doing some HF DX chasing in-between the busy times.

The Island Activation that wasn't......

Today started as a dull, rainy and cold day and continued as such as Mark, VE3EOG, and I drove up Hwy 15 to Upper Brewers Mill Island on the Rideau Canal system.

We arrived and started to set up our antennas, ran the radials and coax, and then fired up the radio.......and then.......we discovered we had "issues".   It looks like I now have a dead FT-857D.   To paraphrase Monty Python......."It's an ex-FT-857D".

And so ended the island activation today.

This is the third time we have tried to activate Upper Brewers Mill Island over the past few years and each time something has cropped up and the activation has been unsuccessful.......perhaps we should take the hint and realize the place is jinxed!!

But, just like Baldrick, we have a cunning plan..........plans are already afoot to activate it later in the summer when it least expects it, maybe that will sort out the jinx!!

Thanks to all of you who were waiting to make contact, we could hear you calling, and many thanks to Tim, VA3TIC, for relaying our 2m messages about having some issues there.

Forans Island Activation

Our old friend John, VE3ISE, will be doing a first time activation of Forans Island, FN03, near Grimsby, Ontario.  This is a small island that is scheduled to be a condo development in the near future.....so get it in your log while you can !!

This activation will take place on Tuesday, June 2nd, at 2200 UTC.

John will start out on 40m and move to 20m later.


Frequencies will be:

40m - 7.260 +/- QRM
20m - 14.260 +/- QRM

Let's all hope the propagation improves for this activation.