So, on a cold Sunday (why do it in the warm weather…right?) we hauled down the fan dipole, which had given me sterling service for nearly five years, and put up the new 80m OCF dipole. It took us a while to tune it, this antenna works on 80m-40m-20m-10m and 6m, and when tuned properly can give you a 1.5:1 SWR across the bands. We could not quite get 1.5:1, but we did get close to that.
From the Bux Comm website |
Within minutes I had a neighbour knocking at the front door and the XYL back in the shack, both complaining of interference with their respective TV’s. Off went the rig for the night and I sat and contemplated what the hell could be wrong.
The rig sat idle for about a week, and during that time I replaced every bit of coax in the shack with brand new pieces. On went the rig, called CQ, more complaints came from the neighbours, and off went the rig.
What to do and more to the point, what the hell is going on. We know these antennas work, and all my neighbours are on cable. Could it be the 4:1 Balun? Nope, checked that out and it works fine, and it was back to contemplating this issue for a few more days.
I had to do something fast as the RAC Winter Contest was coming up, and I needed a working antenna that wasn’t going to get me strung up by my neighbours. So, I did what any good ham would do…the damn thing came down, the old one went back up, and we’re back on the air with no complaints!
And that’s how I earned the “Worked All Neighbours Award”.
I got the worked all neighbors award with the worked all stereos and TVs a few years ago...
ReplyDeleteProblem was resolved when I took the TVI filter out of line???
Go figure...
73bob